Pneumatic Sanitary Clamp Diaphragm Valve introduction:
The Pneumatic Sanitary Clamp Diaphragm Valve is a highly effective valve that is commonly used in a wide range of sanitary applications. It is specifically designed to control the flow of fluids in a sanitary system and is made using high-quality materials that are resistant to corrosion, abrasion, and wear. This valve is highly reliable, efficient, and durable, making it an ideal solution for various industries, including pharmaceuticals, food and beverage, biotechnology, and cosmetics.
The Pneumatic Sanitary Clamp Diaphragm Valve is controlled using compressed air, making it highly efficient and reliable. The valve is easy to operate and can be adjusted to control the flow rate of fluids in the system. It is designed to work seamlessly with other pneumatic systems and can be easily integrated into existing systems.
One of the key features of the Pneumatic Sanitary Clamp Diaphragm Valve is its adjustable diaphragm, which allows users to control the flow rate of fluids through the valve. This is especially important in applications where precise control over the flow rate is necessary. The valve's clamp connection also makes it easy to install and remove, allowing for quick and efficient maintenance.
The Pneumatic Sanitary Clamp Diaphragm Valve is made using high-quality materials that are resistant to corrosion, abrasion, and wear. The valve body is made of stainless steel, while the diaphragm is made of EPDM, which is known for its excellent resistance to chemicals and temperature extremes. This ensures that the valve can withstand harsh operating conditions and maintain its performance over time.
The Pneumatic Sanitary Clamp Diaphragm Valve is suitable for a wide range of sanitary applications, including pharmaceuticals, food and beverage, biotechnology, and cosmetics. It is commonly used in applications that require high levels of hygiene and cleanliness, as it is designed to prevent the buildup of bacteria and other contaminants. The valve is easy to clean and maintain, making it an ideal solution for applications that require frequent cleaning.
Proportional Modulating Pneumatic Sanitary Clamp Diaphragm Valve parameters：
Intelligent positioner parameters:
| Material | PC,PA Stainless steel,silicon rubber |
| Power | Direct-current 24V+/-10% |
| Signal input | 4~20mA or 0~5/10V |
| Setting signal input impedance | 4~20mA signal at 240 Ω0~5/10 V signal at 21KΩ |
| Compressed air requirements | Neutral gas comply with the requirements of DIN ISO 8573-1 |
| Particle model requirements | Class 5(<40um) |
| Particle density requirement | Class 5(<10mg/m³) |
| Pour point requirements | Class3(<-20℃) |
| Oil concentration requirement | Class5(<25mg/m³) |
| Ambient temperature | -20-55℃ |
| Gas connection | In-line quick connector (lnner diametter ∅8mm,6mm or 1/4’’) |
| Electric quick connector | M 13x1.0 three pin(cable diameter ∅5mm)
M 17x1.0 nine pin(cable diameter ∅6mm) M 13x1.0 four pin(cable diameter ∅5mm) |
| Air supply | Higher than the minimum operating pressure actuator 0.5~1bar,max7.0bar |
| Position sensor stroke/stem stroke | 5~50mm |
| installation | Tend mounted actuators top m26 threaded connection and actuators |
| Protection class | IP65,comply with the requirements of EN60529 |
| Power consumption | <5W |
